introduction of a company

Jahankar-e-Esfahan is used to design and manufacture the pressure vessels, heat exchangers and fire tube boilers, utility boilers, boiler package, pressure parts for power plants, and also steel structures and storage Tanks.

This company was approved in accordance with ISO 2001-2000, ISO14001 and OHSAS 18001 and HSE-MS and standard license from Isiri and API5L certificate from NIGC.

This company with Technical staff for fabrication of pressure parts which has more than 30 years experience has the agreement of co-working  with “Darya pala energy company” to do the EPC projects.

Same projects which has done or is doing are as bellows:

A: Manufacture of pressure vessels

  • Manufacture 2 pressure vessels (110 m3 by 45 bar pressure and 40 mm thickness ) for NGL-1200/1300projection .
  • Design and manufacture stainless steel heating coil for oil tank NGL-1200/1300 projection.
  • Manufacture a stainless steel tank for Poly Acryl factory.
  • Construction and erection of a stainless steel tower steel machinery for Arak petrochemical factory .
  • Manufacture pressure piping (500 tons) for Neka and Yazd and Teshrin power plants in Syria.
  • Manufacture pressure piping (2400 tons) for 11 power plants.
  • Manufacture pressure vessel and the stack of Khavaran gas station.
  • Construction of the 3 Flash Tanks and 4 Blow down Tank for compound cycle of Damavand power plant.
  • Construction of the 2 Blow down Tank  and 2 Blow Off Tank for Mobins  petrochemical
  • Construction Riser (pressure piping) of Mobin’s petrochemical.
  • Design and Construction of 8 pressure vessel for Kavian Petrochemical Company.
  • Construction of Blow down Tank for Phase 15&16.
  • Construction of Flash and Blow down Tank for Teshrin.
  • Construction of Hydrogen Pressure Vessel for Kavian Petrochemical.
  • Construction of Methanol Pressure Vessel Unit 2 for Marun Petrochemical.
  • Basic and Detail drawing, Civil, Fabricating and erecting of drum with Piping for Morvarid Petrochemical Co.
  • Construction of Liquid Seal Drum for Arya Sasol Polymer Co and Nargan.
  • Construction of 24 Pressure Vessels for Behbahan Power Plant for Mapna Group.

B-Heat exchanger

  • Performance the engineering activities and also manufacture 500 tons harps for Fars compound cycle power plant. (test under pressure in 164 atmosphere).
  • Construction combination cycle power plant (harps) (2300 tons) for Kerman.
  • Construction combination cycle power plant (harps) (1200 tons) for Damavand.
  • Construction combination cycle power plant (harps) (1200 tons) for Sanandaj.
  • Construction combination cycle power plant (harps) (1200 tons) for Islam Abad-e-Gharb.
  • Construction combination cycle power plant ( harps) (1200 tons) for LNG.
  • Construction combination cycle power plant ( harps) (1200 tons) for Abadan.
  • Construction combination cycle power plant ( harps) (1200 tons) for Esfahan.
  • Construction combination cycle power plant ( harps) for Tishreen.

10-Construction  compound a Quench Distributor Reactor for Bandar Abbas 01 Refinery.

 

C-Utility Boilers

  • Detail design and performance the engineering works and manufacture under pressure equipment (150 ton) for 3 boilers (80 ton steam/h) in Mobins petrochemical site.
  • Construction of fire tube Boiler in capacity of 2.5-30(ton/hr.) with Jahankar Design and getting certificate of England Lloyd’s Company and ISQI (Iran Standard & Quality Inspection).

 

 

D-Manufacture industrial and gas Pipes

This company has got the certificate of ISIRI (Institute of Standard and Industrial research of Iran) and (National Iranian gas Company) NIGC to produce the gas and Industrial pipes according to API5L up to 6inch Diameter.

For example:

  • manufacturing the gas pipes up to 6 inch Diameter API5L Gr. B for Pipe Gostar (2000 ton)

E- Manufacture of water and fuel storage Tanks

  • Design and manufacture and erection of 2 storage tanks in 3090 m3 capacity for Ardebil cement factory.
  • Manufacture and erection of a storage tank in 7000 m3 capacity for Kordistan cement factory.
  • Manufacture and erection of two storage tank in 7350 m3 capacity for NISOC.
  • Manufacture and erection of a tank in 1100 m3 capacity for Saveh white cement factory and almost 700 Tons galleries of material transmission.
  • Detail design and manufacture 2 Stack machinery for projection NGL-1200/1300 in Gachsaran and Bibi Hakimeh regions.
  • Preparing, manufacture and erection of 2 set water storage tanks for Ilam petrochemical (20000 m3).
  • Civil works , manufacture and erection of a fuel storage tank in 35000 m3 capacity for sanandaj power plant with equipment  as    instrument in pc .
  • Detail design and manufacture of Stack for Mobin petrochemical in 5 meter diameter and 45 meter height.
  • Manufacture of Storage Tanks 7350 M3-2 Unit for South Oil Area Co.
  • Detail drawing, fabricating and Erection of 4 Storage Tanks for Esfahan Steel Co.
  • Basic and Detail drawing, Civil, Fabricating and erecting of storage tanks with Piping for Morvarid Petrochemical Co.
  • Detail Drawing, Procurement and Fabricating of two Acid and Base tank for Safa foulad (Esfahan Mobarakeh Steel co.)
  • Supplying, fabricating and erection 2Unit of 100m3Petrol Storage tank for Sepahan Oil Co.
  • Manufacture of 4 Sour Storage Tanks for Esfahan Oil Refinery and Chagalesh
  • Manufacture of 6 Sour Storage Tanks for Esfahan Oil Refinery and Nargan
  • Detail drawing , fabricating and Erection of 5 Storage Tanks for Parand Power Plant

 

F- Manufacture and erection metal and steel structure

  • Production of hollow box (100×100×4) about 20000 ton for reconstruction Bam city due to earthquake and Kermanshah, Ghazvin, Zanjan and Hamedan.
  • Manufacture almost 40000 tons (500000 pieces) metal pieces for the various companies of Iran dispatches ministry.
  • Manufacture and erection of almost 5000 tons steel structure in Esfahan alloy steel.
  • Manufacture 200 tons Penstock of Panzdahom Khordad dam.
  • Design, construction and erection of numerous structures from 12 meter width up to 60 meter for the numerous projections.
  • Design, manufacture and erection of structure in 36×60 meters width- size for Esfahan white Portland cement factory.
  • Design, manufacture and erection of steel structure in 36×45 meters width size for the work and social affairs department of Natanz.
  • Design, manufacture and erection of structure in 60×102 meters width size for dry grasses warehouse of Jahad Esfahan ministry.
  • Preparing, manufacture and selling of structure in 48 meter width for Isfahan agricultural Jahad ministry.
  • Providing the specialized lab-our forces and restoration Arak refinery ISO MAX unit.
  • Manufacture Harp for Mapna Group- Mapna Boiler
  • Design, Engineering, Fabrication and Erection of 12000ton Heavy and Medium –Light Weight – Shelter Steel Structure for Petro Pars Iran Co.
  • Manufacture Handrail and Ladder for Kanrood Saze Co.
  • Design, Engineering, Fabrication and Erection of 1310ton Heavy and Medium –Light Weight – Shelter Steel Structure for Petro Pars Iran Co.
  • Manufacture Steel Structure for Chaharbagh Bala project for Maskan zayanderood Co.
  • Manufacture Steel Structure for Isfahan oil Refinery Project for Chaghalesh Co
  • Manufacture Steel Structure for Esfahan oil Refinery Project for Nargan Co
  • Manufacture Steel Structure for Lordegan Urea Fertilizer Co for Farayand Tarh Gostar Co

And we are doing so many other projects.

Best regards

Mortez. Adhami.

                                                                                                    Directing Manager